Are you licensed and insured in Washington state?

Yes. Zeus Garage Doors is a licensed and insured contractor in Washington state. We carry liability insurance on every job. You can always ask to see our license number at time of service.

Do you give estimates over the phone?

We don't quote prices over the phone — and neither does any honest garage door company. Every job is different: spring sizes, cable condition, door weight, and brand all affect cost. We come to you, assess in person, explain everything clearly, and give you an exact price before any work begins.

What neighborhoods in Kirkland do you serve?

We serve all Kirkland neighborhoods including Juanita, Totem Lake, Finn Hill, Houghton, Bridle Trails, North Rose Hill, South Rose Hill, Kingsgate, Norkirk, Moss Bay, and the Highlands . If you're anywhere in the 98033, 98034, or 98074 zip codes, we've got you covered.

How much does garage door repair cost in the Eastside area?

The cost of garage door repair depends on the type of repair needed (springs, cables, rollers, sensors) and the specific hardware your door requires. New door installation costs vary based on material, size, and insulation. We provide exact, transparent pricing after an in-person assessment — never over the phone.

Can I open my garage door if the cable is broken?

Absolutely not. The cables carry the entire weight of the door (often 200-300 lbs). If you try to use the opener with a broken cable, the door will bind in the tracks, bend the panels, and potentially burn out your opener motor.

Should I replace both cables if only one is broken?

Yes. Cables experience the exact same amount of tension and wear over time. If one has snapped, the other is likely severely fatigued and will snap soon. We always replace cables in pairs to ensure proper door balance.

What regular maintenance does a garage door need?

A garage door needs a full service check twice a year — spring and fall are ideal. The routine: Lubricate all hinges, rollers, and the torsion spring coils with white lithium grease or a garage door-specific spray (never WD-40, which strips existing lubrication). Tighten all bolts, lag screws, and track brackets — vibration loosens hardware over time. Inspect weatherstripping at the bottom and sides and replace any sections that are cracked or no longer making contact. Test auto-reverse safety : place a 2x4 flat on the floor in the door's path — the door must reverse within 2 seconds of contact; if it doesn't, adjust the opener's down-force setting or call a technician. Test door balance : disconnect the opener and lift the door by hand to waist height and let go — it should float in place; if it drops or rises, the spring tension needs professional adjustment.

What causes garage door cables to break?

Garage door lift cables fail for three main reasons. Age and fraying is the most common — the cable wraps around a drum thousands of times and individual wire strands break over years of use, weakening the cable until it snaps. Bottom bracket failure : when the bottom bracket that anchors the cable detaches or bends, the cable loses tension and goes slack, then wraps incorrectly on the drum, causing it to snap on the next operation. Spring failure : when a torsion spring breaks, the full weight of the door suddenly loads the cables — they were never designed to handle the unassisted weight of the door and can snap from the shock load. A fraying or slack cable is visible — if you see fraying strands or one side of the door is lower than the other, stop using the door and have the cable replaced immediately, as a broken cable causes the door to fall.

Same-Day Service · Kirkland & Eastside WA

Cable Replacement

Your cables hold the entire weight of the door. When they fray or snap, you need heavy-duty replacements immediately to prevent property damage.

Quick Answer

Zeus Garage Doors provides same-day garage door cable replacement in Seattle, Kirkland, Bellevue, and the Eastside. If your cable is snapped or frayed, the door is unsafe to operate. We use aircraft-grade galvanized steel cables to withstand PNW humidity. Call 425-448-6443 for fast service.

📞 Call for Same-Day Service Get Free Estimate

⚡ Same-Day Available🔧 Licensed · Bonded · Insured🛡️ 5-Year Warranty on Parts & Labor💰 Upfront Pricing📍 Local Kirkland Business

What's Included in Our Cable Replacement

Remove snapped, frayed, or rusted lift cables safely
Install high-tension, aircraft-grade galvanized steel cables
Check cable drums for wear and proper alignment
Re-balance the torsion springs to match the new cables
Lubricate pulleys and bottom brackets to prevent future wear

Related Components & Standards

Lift cablesSafety cablesGalvanized steel wireCable drumsTorsion spring systemExtension springsBottom bracketsPulleysFrayed wireTensile strength

Industry standards set by DASMA (Door & Access Systems Manufacturers Association). Zeus Garage Doors is a licensed and insured Washington State contractor.

Signs You Need This Service

If you're experiencing any of these in Seattle, Kirkland, Bellevue, or the Eastside area — call us today.

You see visible fraying, rusting, or unwinding on the metal cables
The door is hanging slightly unevenly on one side
A cable has completely snapped and is hanging loose
The cables are slipping off the drums when operating
The door feels extremely heavy or drops quickly when closing

Pricing

Custom On-Site Quotes

Exact quote provided after free in-person assessment

Why Kirkland Homeowners Choose Zeus

Local owner. Same-day service. We come to you, explain everything clearly, and stand behind our price.

Aircraft-Grade Steel

We don't use cheap builder-grade cables. Our cables are made of thick, galvanized steel built to lift massive weight without stretching.

Perfect Balance

Replacing cables requires recalibrating the springs. Our technicians ensure your door is perfectly balanced so your opener motor isn't strained.

PNW Weather Ready

Standard cables rust quickly in the damp Washington climate. Our coated cables are designed to resist oxidation and last years longer.

5-Year Warranty

Every cable replacement comes backed by our 5-year parts and labor warranty — the strongest guarantee in the Eastside. If anything fails, we come back at no charge.

What Are Garage Door Lift Cables?

Garage door lift cables are high-tensile galvanized steel wires that connect the bottom corners of your garage door to the cable drums mounted on the torsion spring shaft above. When the torsion spring unwinds during opening, the drums rotate and wind the cables, pulling the door upward along the vertical tracks. On extension spring systems, cables run over pulleys mounted at the top of the tracks and attach to the door bottom brackets. Lift cables typically measure 1/8 inch or 3/32 inch in diameter and are rated for thousands of pounds of tensile force. Despite their strength, cables fray over time due to the repeated bending stress at the drum and pulley contact points, exposure to moisture, and minor misalignment in the track system. A frayed or snapped cable causes the door to become uneven, jam in the tracks, or drop suddenly on one side — all of which create a safety hazard that requires immediate professional repair.

Garage Door Cable Repair in Kirkland and the Eastside

When a lift cable snaps or frays on a Kirkland garage door, the door typically drops on one side and binds in the track. Attempting to operate the door manually or with the opener in this condition can bend the track, damage the opener carriage, or cause the door to fall. Zeus Garage Doors technicians respond same-day to cable failure calls across Kirkland, Bellevue, Redmond, Bothell, and all Eastside communities. The repair process begins with safely releasing tension from the torsion spring system before any cable work begins — a critical safety step that requires professional training and winding bars. We then remove the damaged cable, inspect the cable drum, bottom bracket, and pulleys for wear, and install new galvanized steel cables on both sides. Cables are always replaced in pairs: replacing only the broken side leaves an aging cable on the opposite side that will fail shortly after. After installation, we re-tension the spring system, test door balance, and verify smooth operation through several full cycles. The entire repair typically takes 60 to 90 minutes and is completed in a single visit.